1. What is 4GT?
4GT enables engineers to specify characteristic of a software at the high level & then automatically generate source code. 4GT provides a collection of software tools through which software engineers to solve problems using graphical notation, so that users can easily understand problems. Using 4GT, allow the programmers to define what they want to do, but not specify how to do.
2.A chip having 150 gates will be classified as
(A) SSI (B) MSI
(C) LSI (D) VLSI
Ans:-B
Explanation:-
The number of gates for the different classification are as follows.
Small Scale Integration(SSI) - <10
Medium Scale Integration(MSI) - between 10 to 1000
Large Scale Integration(LSI) - >1000
Very Large Scale Integration(VLSI) - >100000
So the answer is option B.
3. The number of point to point links required in a fully connected network for 50
entities is
(A) 1250 (B) 1225
(C) 2500 (D) 50
Ans: (C)
4. For a non blocking cross bar configuration, taking N as the number of subscribers,
there will be ______number of cross points and _______number of switches for
establishing connections when all the subscribers are engaged.
(A) N/2, N2 (B) N2 , N/2
(C) 2N, N2 (D) N/2, N3
Ans: (B)
5. Echo suppressor is detrimental to full duplex operation because
(A) It disables one of the two pairs in a four-wire trunk line when a signal is
detected on the other pair.
(B) It enables one of the two pairs in a four-wire trunk line when a signal is
detected on the other pair.
(C) It activates both the pairs of a four-wire trunk line.
(D) It is independent of line conditions.
Ans: (A)
6. Telephone companies normally provide a voltage of __________to power
telephones.
(A) +24 volts DC (B) -24 volts DC
(C) +48 volts DC (D) -48 volts DC.
Ans: (D)
7. The situation when both transmitter and receiver have to work in tandem is referred
to as
(A) parallel (B) serial
(C) synchronous (D) asynchronous
Ans: (C)
8. Common channel signalling______________
(A) Uses the speech or data path for signaling.
(B) Does not use the speech or data path for signaling.
(C) Needs no additional transmission facilities.
(D) Finds it difficult to handle signaling during speech.
Ans: (C)
9. A large numbers of computers in a wide geographical area can be efficiently
connected using
(A) twisted pair lines (B) coaxial cables
(C) Communication satellites (D) all of the above
Ans: (D)
10. Which transmission mode is used for data communication along telephone lines?
(A) Parallel (B) Serial
(C) Synchronous (D) Asynchronous
Ans: (B)
11. A sample rate of ________is required for a good quality representation of telephone
conversation.
(A) 4500 times per second.
(B) 700 integer sample points per minute.
(C) 50 times per second per mile of distance travelled.
(D) 8000 times per second.
Ans: (C)
12. The ________is a circuit-switched network, while the ______is a packet-switched
network.
(A) Telephone, ATM (B) SONET and FDDI
(C) Satellite, Telephone (D) FDDI and SONET
Ans: (A)
13. A Master group consists of
(A) 12 voice channels. (B) 24 voice channels
(C) 60 voice channels. (D) 300 voice channels
Ans: (D)
14. Direct inward dialling is used as a feature in
(A) PSTN. (B) PBX.
(C) EPABX. (D) VPN.
Ans: (C)
15. Trunks are the lines that run between
(A) Subscribers and exchange
(B) switching system and power plant
(C) Local area network.
(D) Switching stations.
Ans: (D)
